Misting Systems

Showing all 3 results

  • The refreshment of a cooling mist

    EXTREMEMIST Portable Misting System, 4-nozzle

    A complete system and great value in a portable container with a 170 psi (18.6 bar) pump – better cooling than lower pressure systems. Includes nozzles, lines, connectors, rechargeable power bank, and micro USB charger. Comes with an 8-speed remote that can work from up to 30 feet away.

    Everything you need to cool off except the water!

    Buy on Amazon.

     

    Water:

    • You supply the water in any container, including the kit’s container or any clean bottle, tank, or jug you have. Always use clean water (distilled / filtered water is best) with any misting system because the nozzles clog very easily and the smallest minerals can make your system useless.
      • Uses 1/2 gallon per hour on average, or about 1 gallon per hour at the highest setting

    Nozzles:

    • Unlike many other lower end systems, these nozzles can be removed to be cleaned by tapping to remove a clog, or by soaking in white vinegar or CLR. Extra nozzles are provided.
      • Anti-drip construction
      • Swivel to direct spray where you need it
      • Removable for cleaning
      • Ceramic components in nickel-brass housings don’t corrode the way metal components can

    The Pump:

    • Extrememist chose a low-pressure pump for its portability and lower cost. Higher pressure pumps that create finer, dryer, cooler mists are larger, heavier, less portable, and more expensive, so this choice makes sense for a portable unit. You can expect to get wet from any low-pressure misting system – to lower the water pressure, the wetter you’ll get and the less cooling you’ll get. But this 170 psi pump can product finer droplets than most other low pressure systems, keeping you cooler and drier.
      • Can be plugged into an outlet or it can last 5-12 hours from one battery charge, depending on the speed you select.

    Tubing and Mounts:

    • Comes with 16 feet of flexible tubing. That’s enough to line the edge of a 9 foot umbrella, the edge of a patio cover or awning, almost two full sides of a 10 foot by 10 foot canopy, a cart, or even along the top of a fence. The mounts are reusable and can be easily repositioned.
      • 16 feet (4.9 m) of flexible tubing
      • Reusable mounts can be repositioned again and again

    Battery:

    • 6600mAh 3.7V. Max wattage is 15W.

    CUSTOMER SERVICE is responsive if you need any assistance or replacement parts. Also, there are helpful videos on Amazon about setting up and maintaining this system.

     

  • high pressure misting systems and tents keep elegant outdoor events comfortable

    Misting System: High Pressure (700 psi) 14′ Desert Climate Kit – Smart Mist USA

    Specially designed for hot, low-humidity desert-types of climates.

    From Smart Mist USA, it’s one of the highest quality and lowest priced high pressure misting system kits available! It balances water pressure, flow rate, nozzle size & quantity, and component ratings for a simple, highly effective, easy to install, and affordable solution to the heat.

    KEY FEATURES:

    • High pressure 1000 psi pump for exceptional cooling power
    • 7 – .008″ nozzles for the hottest, driest, desert climates. Spaced about every 24 inches, creates a 14-foot line of cooling mist.
    • Customizable line of mist is adaptable to your outdoor layout
    • Convenient smartphone app for remote operation
    • Multiple spray interval options to balance effective cooling and water use
    • Corrosion-resistant brass nozzles with integrated filtration
    • User-friendly quick-connect assembly system
    • Comprehensive kit includes sediment filter and tube cutting tool

    MOST EFFECTIVE COOLING:

    • Most effective in climates under 60% humidity.
      Find your average humidity levels at TimeAndDate.com by entering your nearest city.
    • For non-desert heat, choose the Most Hot Climates Kit with 12 smaller .006″ nozzles. This can make a cooling mist line about 24 feet long (nozzles spaced every 24 inches).
    • Both kits are best for small, partially enclosed areas or patios.

    PUMP:
    • 700 PSI – Nearly 3X the pressure of mid-pressure systems and over 100X the pressure of low-pressure systems
    • Fully enclosed 2-piston pump for minimal maintenance

    NOZZLES:
    • Premium nickel-plated brass anti-drip nozzles with built-in filter
    • Adjustable mist direction
    • Recommended 24-inch spacing between nozzles

    FITTINGS:
    • Simple “push to connect” design for quick and easy assembly
    • Nickel-plated brass construction for durability and corrosion resistance

    TUBING:
    • 65 feet of nylon tubing that withstands high pressure
    • Flexible for curving around corners and adapting to tricky installations
    • 24 tube clamps

    REMOTE CONTROL:
    • Smartphone app connects up to 50 feet away from the pump
    • Controls pump on/off and various interval spraying options
    • Saves water and adjusts cooling intensity

    ADDITIONAL INFORMATION
    • Phosphate filter recommended for hard water or well water to minimize clogging
    • Responsive customer service for questions, installation, and warranty support
    • Small company located in the USA

    Basic Installation:
    1. Place pump in a flat, dry, well-ventilated space near electricity and water
    2. Connect to 110V GFI – protected outlet (use 12-gauge outdoor extension cord if needed)
    3. Install SmartUSA app and test remote control
    4. Cut and connect tubing, attach fittings and nozzles
    5. Mount tubing to desired structure
    6. Connect pump to water source and open water valve to test system

     

  • high pressure misting systems and tents keep elegant outdoor events comfortable

    Misting System: High Pressure (700 psi) 24′, Most Hot Climates Kit – Smart Mist USA

    This may be the highest quality and lowest priced high pressure misting system available! It balances water pressure, flow rate, nozzle size & quantity, and component ratings for a simple, highly effective, and affordable solution to the heat.

    KEY FEATURES:

    • High pressure pump for exceptional cooling power
    • Customizable line of mist, adaptable to your outdoor layout
    • 12 – .006″ nozzles for most hot, dry climates, Spaced 24 inches apart, creates a 24 foot line of cooling mist.
    • Convenient smartphone app for remote operation
    • Multiple spray interval options to balance effective cooling and water use
    • Corrosion-resistant brass nozzles with integrated filtration
    • User-friendly quick-connect assembly system
    • Comprehensive kit includes sediment filter and tube cutting tool

    FOR THE MOST EFFECTIVE COOLING:

    • Most effective in climates under 60% humidity.
      Find your average humidity levels at TimeAndDate.com by entering your nearest city.
    • For very hot, dry, desert climates, choose the Desert Climate Kit with 7 larger .008″ nozzles and a shorter, 14-foot line of cooling mist.
    • Both kits are best for small, partially enclosed areas or patios.

    PUMP:
    • 700 PSI – Nearly 3X the pressure of mid-pressure systems and over 100X the pressure of low-pressure systems
    • Fully enclosed 2-piston pump for minimal maintenance

    NOZZLES:
    • Premium nickel-plated brass anti-drip nozzles with built-in filter
    • Adjustable mist direction
    • Recommended 24-inch spacing between nozzles

    FITTINGS:
    • Simple “push to connect” design for quick and easy assembly
    • Nickel-plated brass construction for durability and corrosion resistance

    TUBING:
    • 65 feet of nylon tubing that withstands high pressure
    • Flexible for curving around corners and adapting to tricky installations
    • 24 tube clamps

    REMOTE CONTROL:
    • Smartphone app connects up to 50 feet away from the pump
    • Controls pump on/off and various interval spraying options
    • Saves water and adjusts cooling intensity

    ADDITIONAL INFORMATION
    • Phosphate filter recommended for hard water or well water to minimize clogging
    • Responsive customer service for questions, installation, and warranty support
    • Small company located in the USA

    Basic Installation:
    1. Place pump in a flat, dry, well-ventilated space near electricity and water
    2. Connect to 110V GFI – protected outlet (use 12-gauge outdoor extension cord if needed)
    3. Install SmartUSA app and test remote control
    4. Cut and connect tubing, attach fittings and nozzles
    5. Mount tubing to desired structure
    6. Connect pump to water source and open water valve to test system